Welder Skills for Your Resume (Philippines)
Fabrication shops and plants screen welder resumes for processes (arc, MIG, TIG), qualified positions, materials, drawing reading and weld symbols, fit-up and cutting, and quality: rejection rate and inspection results. Below: 13 skills grouped by type, each with an example bullet.
By Rajesh Kumar · How these pages are made
Free to build and preview · pay once to download · no auto-renewal
Top skills for a welder resume
Safety discipline is checked at every trade test. Use the list below when you adapt any welder resume sample Philippines employers will read.
- Arc welding (SMAW)
- MIG welding (GMAW)
- TIG welding (GTAW)
- Structural welding 3G/4G
- Stainless steel and aluminium welding
- Reading fabrication drawings and weld symbols
- Grinding and fit-up
- Gas cutting and plasma cutting
- WPS / PQR
- Visual weld inspection
- Radiography and dye-penetrant acceptance
- Safety discipline
- Training helpers
What the official job profile lists for a welder
In the Philippines, TESDA's training regulations for Shielded Metal Arc Welding (SMAW) NC II set out what a welder must be able to do: weld carbon steel plate and pipe to a layout, blueprint, work order, welding procedure or spoken instruction. The common units cover safety practices, reading drawings and sketches, industry calculations, the quality system, hand tools, preparing weld materials, setting up equipment, fit-up and weld repair. The core unit is the welding itself, done as root, filling and capping passes to the WPS and checked for defects. The qualification conforms with AWS D1.1, ASME IX, API 1104 and ISO 9606-1.
The plate position named in the regulations is 4G, and the pipe positions are 1G, 2G, 5G and 6G. Assessment needs evidence of pipe welds in 2G and 5G or 6G to an approved WPS, and a National Certificate is awarded once every unit is passed. TESDA's competency map also lists separate units for GMAW, GTAW, FCAW, gas welding and alloy steels. The US O*NET profile adds safe work habits, welding in flat, vertical and overhead positions, and checking parts for defects.
The example bullets below are illustrative: every figure is made up. Use your own numbers.
Processes skills for a welder resume
- Arc welding (SMAW): Stick welding with coated electrodes. TESDA's SMAW NC II covers welding carbon steel plate and pipe to a WPS. Name the electrodes, the positions and the material thickness you weld, since a trade test checks all three. Example: Welded 250+ mild steel joints in flat and horizontal positions.
- MIG welding (GMAW): Wire-fed welding used for fast production work on brackets, frames and fixtures. O*NET lists gas metal arc equipment among the welder's core tools. Give your weekly output and the parts you make. Example: Weld about 120 fixtures and brackets a week with MIG and TIG.
- TIG welding (GTAW): Slow, precise welding for stainless, thin sheet and visible joints. TESDA's welding map lists separate GTAW units for carbon and alloy steel. Your rejection rate is the number a quality engineer will look for first. Example: Weld stainless fixtures by TIG with rejection below 1.5% in 2025.
- Structural welding 3G/4G: Vertical and overhead plate welds are harder to pass than flat ones, so employers ask which positions you have qualified in. Give the position codes, the process and who tested you. Example: Qualified in 3G and 4G positions for plant fixture work.
- Stainless steel and aluminium welding: Non-carbon metals need different filler, heat control and cleaning. TESDA's competency map lists separate alloy steel units. Name each metal you weld and give a quality figure such as rework. Example: Welded 30 aluminium enclosures a month with 0 rework.
Preparation skills for a welder resume
- Reading fabrication drawings and weld symbols: TESDA's SMAW NC II includes interpreting drawings, sketches and welding symbols as a common unit. Say what you built from drawings and how many, so a supervisor can see you work without being shown each joint. Example: Fabricated 15 structural frames from shop drawings with weld symbols.
- Grinding and fit-up: Fitting up weld materials is its own TESDA unit, and a good fit-up decides whether the root pass passes. Mention the gaps and alignment you check and your weekly part count. Example: Check every gap and tack before full welds on 120 parts a week.
- Gas cutting and plasma cutting: Preparing weld materials in TESDA's training includes setting up cutting equipment and cutting and preparing plate edges. List the cutting methods you use and the volume. Example: Cut 200 plates a month to size with gas and plasma.
- WPS / PQR: A welding procedure specification sets the electrode, current, positions and joint preparation. TESDA's core unit requires root, filling and capping passes done to the WPS. Say how many procedures you have worked to. Example: Welded to 4 site WPS documents on structural jobs.
Quality and safety skills for a welder resume
- Visual weld inspection: TESDA's SMAW unit lists the defects a welder must spot, including porosity, undercut, slag inclusion, cracks and lack of fusion. O*NET also lists examining workpieces for defects. Say how often you check your own work. Example: Check my own welds for undercut and porosity on every 1 of 120 weekly parts.
- Radiography and dye-penetrant acceptance: Testing that finds hidden defects after welding. Inspectors run the tests; what you list is your pass record. Give the joints tested, the method and the result. Example: Passed DPT on 40 stainless joints in 1 audit.
- Safety discipline: O*NET's first listed task is operating safety equipment and using safe work habits, and TESDA training covers protective clothing, first aid and fire extinguisher use. An injury-free record over years is the strongest line. Example: Worked 4 years with 0 burn or eye injuries.
- Training helpers: Teaching helpers to grind, prepare joints and set up machines safely is the usual step toward lead welder or foreman. Give the number you trained and what you taught. Example: Train 3 new helpers on preparation, grinding and equipment safety.
Which welder skills to lead with, by experience
Entry level: Lead with your NC qualification or trade course, the processes you trained on and the positions you passed. Give joint counts from training, the drawings you can read and the cutting and grinding tools you use. Put safety near the top. A shop taking on a junior welder wants clean fit-up and a careful worker before speed.
Experienced: Lead with the positions you are qualified in, the codes you have tested to and your rejection or rework rate. Name the metals and the industries: structural, piping, fixtures, enclosures. Then show the step up: working to several WPS documents, repairing welds after testing, training helpers or running a small crew toward foreman.
Certifications for a welder resume
- ITI Welder (NCVT or SCVT) · year and marks.
- Welding position qualifications (3G, 4G, 6G) · with date and inspector.
- Welding safety or trade test certificates for overseas jobs.
What to leave off a welder resume
- Positions you have practised but not passed. Say "practising 6G" rather than claiming it, since a trade test will settle it.
- A long list of hand tools. Every welder uses a chipping hammer and wire brush; name processes, positions and codes instead.
- Certificates without dates or the body that issued them. Qualifications are checked, and an undated one looks out of date.
- "Skilled in all types of welding". Nobody is; specific processes and metals read as true.
Action words that show welder skills
Welded, Fabricated, Repaired, Fitted, Inspected, Qualified, Trained, Cut, Completed, Led.
Skills for related jobs
Sources
Checked on 4 October 2026.
What skills should a welder put on a resume?
Start with your processes (SMAW, GMAW, GTAW) and the positions you are qualified in. Then add materials, drawing and weld-symbol reading, fit-up, cutting and working to a WPS. Finish with quality and safety: visual inspection, test results and your injury record. Put a joint count or rejection rate next to each skill.
What welder skills can freshers list?
The processes and positions you practised in training, the joints you completed, the drawings you worked from and the safety habits you follow. Name your qualification and the body that assessed you. TESDA's SMAW NC II, for example, covers safety, drawings, calculations, hand tools, fit-up and weld repair alongside the welding itself.
What soft skills matter for welders?
Safety discipline first, then a steady hand, following instructions exactly, teamwork and punctuality. TESDA's basic units include workplace communication, working in a team and occupational health and safety. O*NET adds arm-hand steadiness and quality control. Show each one with a fact, such as years without an injury.
What does a structural welder list?
Plate positions such as 3G and 4G, the structural steel you work on, the site WPS documents you follow, your fit-up and your inspection results. TESDA notes that its SMAW NC II conforms with the AWS D1.1 structural welding code, so naming the code you tested to helps.
How do welders get certified in the Philippines?
Through TESDA. For SMAW NC II, trainees should first hold or complete SMAW NC I. To earn the National Certificate, you must show competence in every unit, and assessment centres on welding carbon steel plate and pipe. Graduates of formal or enterprise-based training and experienced workers can both apply.
What skills do you need to be a welder?
Arc, MIG and TIG process knowledge (SMAW, GMAW, GTAW) comes first, then reading drawings and weld symbols, fit-up and measuring, and safety habits with fumes, heat and protective gear. Welding skills also include a steady hand, patience and the physical fitness for long work in awkward positions. Show them with positions and joints you have completed.